https://youtu.be/llpYrUh-X-0On this edition of 30 on 3D, Eric Alexander, Application Engineer, explains how to use the Print-on-Tray feature in GrabCAD Print Pro to print exceptionally smooth surface finishes.Print-on-Tray enables users to print directly on the tray or with … [Read more...]
30 on 3D: Using the Smart Insert Feature for a 3D Printed Infinity Gauntlet
https://youtu.be/4L0RdaPBHOgOn this edition of 30 on 3D, Cameron Williams, Sr. R&D Engineer, explains how he used the new Smart Insert feature from GrabCAD Print Pro to 3D print his replica of the Infinity Gauntlet.Smart Insert enables users to bring a new level of … [Read more...]
30 on 3D: 3D Printing Orthotics with the H350
https://youtu.be/QX6XeaiW0Ko On this edition of 30 on 3D, 3D Printing Account Specialist, Madeline Moore, goes through the different processes of manufacturing orthotics and how 3D printing custom foot orthotics using the H350 can help save time and money. There are 3 main … [Read more...]
Part of the Month: Circuit Board
You would think after 13 years of working at Purple Platypus, Jason Lasunowicz, one of our Field Service Technicians, would already have a favorite part in our showroom. But by the look of pure panic on his face when I asked him to choose one for Part of the Month, I guess he … [Read more...]
A Hole-In-One Golf Kit
Fore! Watch out, a new sales kit has arrived. Take a look at some of the SLA golf parts from the new Stratasys Stereolithography sales kit. It's a hole-in-one! If you havent watched our unboxing video of this kit, watch it here. Explore the Golf … [Read more...]
30 on 3D: Coloring Dental Models in GrabCAD
https://youtu.be/-snT3rp1WSEOn this edition of 30 on 3D, Sales Engineer, Hudson Romain takes us through adding color to different sections of dental models and dentures using GrabCAD.It's easier than you think to add color to your dental models. With a variety of different … [Read more...]
Part of the Month: SLA Water Lily
For February’s Part of the Month, Post-Processing Technician, Brian Alberta, chose a part we all know and love… the large SLA Water Lily. As you may remember, this part made its debut in a video back in April of last year where we showed it rising out from the Neo450s in slow … [Read more...]
30 on 3D: New Purple Platypus University Training Center
https://youtu.be/Yc-JRE_10xoOn this edition of 30 on 3D, 3D Printing Account Specialist, Madeline Moore, gives a tour of the new Purple Platypus University Training Center wing!After 10 years of offering technical classes for Purple Platypus University (PPU), our team is excited … [Read more...]
Part of the Month: SAF Chainmail
I had Roman Fanizza pick the January Part of the Month to kick start 2024. Roman likes to design and 3D print parts in his spare time so I knew he was going to pick an awesome part. Boy, he did not disappoint. The PA11 chainmail Roman … [Read more...]
30 on 3D: Labels in GrabCAD Print Pro
https://youtu.be/2q9tmWjGpyY?si=37ZdFxNUpTdbcLdFOn this edition of 30 on 3D, Development Engineer, Brandon Liu takes us through the steps of using the Labels feature in GrabCAD Print Pro. The Labels feature allows you to add custom text to be embossed or debossed on the surface … [Read more...]
- 1
- 2
- 3
- 4
- Next Page »