https://youtu.be/Wj9-aDzjPwk?si=hraemfbmrvbVFNBTOn this edition of 30 on 3D, Development Engineer, Brandon Liu takes us through the steps of using the Assembly feature in GrabCAD Print Pro. The Assembly feature allows users to turn any selection of multiple models into an … [Read more...]
30 on 3D: Accuracy Center in GrabCAD Print Pro
https://youtu.be/f_F4HkUF-EA?si=hKnuoWHcVz2x3dwVOn this edition of 30 on 3D, Development Engineer, Brandon Liu takes us through the steps of using Accuracy Center in GrabCAD Print Pro. The Accuracy Center takes a scan of your printed part and then compares it with your design … [Read more...]
30 on 3D: Per-Part Time Estimation in GrabCAD Print Pro
https://youtu.be/fmqhtCUW-TE On this edition of 30 on 3D, Development Engineer, Brandon Liu takes us through the steps of using the Per-Part Time Estimation feature in GrabCAD Print Pro. With the per-part time estimation feature, you can receive time estimations per part … [Read more...]
Part of the Month: Air Intake Hose
If anyone works with 3D printed parts the most, its our Post Processing Team. Which is why I had Jerriel, one of our Post Processing Technicians, pick out October's Part of the Month. He chose an air intake hose printed in TPU 92A. Jerriel was drawn to this part soley because … [Read more...]
30 on 3D: Nesting Parts Using 3D Array in GrabCAD Print Pro
https://youtu.be/SDPV1KJnExg On this edition of 30 on 3D, Development Engineer, Brandon Liu takes us through the steps of nesting your parts using the 3D array feature in GrabCAD Print Pro. With the 3D array feature, you can create a 3-dimensional array of a selection of … [Read more...]
Part of the Month: Dumbbells
Double Dense - 14% Sparsity Dense - 6% Sparsity On this edition of Part of the Month (or should I say Parts of the Month), Porcupine Sales Representative, Saxon Swart, chose these two FDM dumbbells. He likes that he can work out at the office, but he mostly likes that he … [Read more...]
Experience Stratasys Truck Tour Hosted by Purple Platypus
Purple Platypus will be hitting the road on the Experience Stratasys Truck Tour! We will be arriving in a mobile showroom that is exhibiting exciting 3D printers, parts, and a wall of different 3D materials. Purple will be making stops in Phoenix, Los Angeles, San Diego, and … [Read more...]
Part of the Month: Milled Buckles
This month’s Part of the Month was chosen by none other than Senior Sales Engineer, Max Semko. Max had a really tough time picking out a part, a side-effect of working at Purple for 14 years, and knowing our showroom in-and-out. But, ultimately, he chose a milled block of buckles … [Read more...]
30 on 3D: Adding Color to PolyJet Parts in GrabCAD
https://youtu.be/IZUyx5dOTmg On this edition of 30 on 3D, Development Engineer, Brandon Liu takes us through the steps of adding color to your PolyJet parts in GrabCAD Print. In GrabCAD Print, you can easily color separate sections of a part or color the body as a … [Read more...]
Part of the Month: Air Turbine Induction Housing
This month’s Part of the Month is an up-scaled air turbine induction housing, chosen by Development Engineer, Brandon Liu. It wasn't chosen for the reasons you may think, like being practical or having interesting engineering factors. No, Brandon chose this part because he thinks … [Read more...]