CleanPoint
SEQUENTIAL ROBOTIC WASH STATION
CleanPoint automatically cleans DLP parts, offering complete control over exposure to solvents. Simply set the timer and walk away, knowing that the part will be robotically cleaned and removed from the solvent.

How It Works
Proper cleaning of DLP prints is essential to achieve high quality parts. When a DLP print is complete, uncured resin covers the part. Prior to UV curing, this resin needs to be removed using Isopropyl alcohol or detergent. Under-exposure to these solvents can leave resin on the part, creating sticky surfaces and a loss of part definition. Over-exposure effects dimensional accuracy and damages the part’s surfaces.
CleanPoint was designed to eliminate these issues. The unit ensures optimal cleaning by providing control over vortex direction, as well as part plunge, draining duration, and exposure time to the solvent. CleanPoint automatically delivers DLP parts to two independent tanks. The primary tank collects much of the uncured resin, allowing the secondary tank to be clean. When the programmable timer stops, the part robotically lifts out of the tank and drains. It is a hands-free solution that offers ideal part quality.
With CleanPoint, machine operators can focus on higher-level tasks while the part rinses, without fear of damaging the part quality.
Request A Quote
Key Features
- Fully Automatic – Start the machine and walk away, without fear of overexposing parts to solvents.
- Parts are robotically transferred from the “Dirty Tank” to the “Clean Tank.” When cleaning is done, the parts life out of the tank to drain.
- Programmable profiles for each material.
- Complete control over vortex direction and velocity.
See the Specs
Tank Capacity: 6L
Tank Size: 6.25 x 10.5 x 7.5 in.; qty 2
Stirring System: Magnetic
Compatible Solvents:Â IPA, TPM, and detergent
System Size: 18.5 x 14.5 x 36 in.
System Weight: 40 lbs.
The Complete DLP Workflow
Step 1: Clean Part

CleanPoint
Sequential robotic wash station. Compatible with IPA or detergent.
Step 3: Cure Part - Thermal
Thermal curing oven. Pre-programmed for Origin One Validated Materials.