Origin Two
INJECTION-MOLDING QUALITY FOR SHORT PRODUCTION RUNS
The Origin Two delivers high accuracy, repeatability, and injection-molding like surface finish quality. The system is perfect for end-use, low-volume production runs.Â
Achieve Unmatched Quality
The Stratasys Origin Two sets a new standard in precision additive manufacturing with consistent part quality and superior performance.
Highest Accuracy
With its new 5K DLP projector, the Origin Two sets itself apart from other resin technologies. It achieves the highest accuracy (+/-50 µm to +/-100 µm), repeatability, and smoothest surface finish. Consistently produce parts that meet your needs without the need for recalibration of build heads between prints.Â
Injection-Molding Comparable Surface Finish
The Origin Two delivers high surface smoothness while maintaining print speeds of less than 20mm/hour. Its patented pneumatic mechanism allows for lower separation force, enabling fewer supports while printing. Many P3 materials have superb surface qualities that require little to no finishing.Â
High-Performance, Functional End-Use Parts
From high-temperature to high-viscosity materials, you can consistently produce the functional parts you expect. The heated build chamber constantly controls the temperature up to 60°C, ensuring the materials are reaching their full capabilities.
Request a Quote
See The Specs
Build Volume: 7.5 x 4.25 x 14.5 in. Maximum length on the diagonal – 8.6 in.
Accuracy: Up to +/-50 μm (validated application) and +/-100 µm (general)
Repeatability: >95% of prints are within +/-50* µm across printers and build heads*
*Between 25 µm – 200 µm layers with OpenAM
Surface Finish: Surface roughness of up to 2 µm Ra
System Size: 19.7 x 20.5 x 46 in.
System Weight: 189.5 lbs.
Wavelength: 385nm
Pre-Certified Materials Include:Â Biocompatible medical-grade, flame retardant aerospace, elastomeric, & high-impact consumer goods. View all materials.
Upgrade to Origin One+
Elevate your existing Origin One setup to achieve new levels of reliability, repeatability, and accuracy.Â
This upgrade will eliminate the need for frequent calibrations which is great for short or flexible production runs. The Origin One+ guarantees unbeatable surface finish, consistently accurate parts, and tight tolerances.Â
